Mirror Acrylic - Sterling

Material Thickness: 3mm (thickness varies up to 1mm either way between batches)

Single Sided Mirror Effect

Gloss mirrored finish on the front, matte grey backing on the reverse side.

Engraved Mirror Items:

Engraving on mirror leaves a semi transparent frosted effect. The base layer of the coloured mirror is a tinted acrylic so etched areas will be a lighter tone of the colour you are ordering. Engraved areas will show though any glued on attachments

Use:

Best suited for small, medium and large shapes not less than 15mm. We don't not offer mirror in any of Mini shapes. The laser injects a lot of heat when cutting and our mini shapes are not suitable.

Protective paper:
Applied front and back to solid shapes - This will need to be peeled off when received your end.

Etched Shapes - Paper Film applied to front only. Peel off the reveal your chosen mirror colour.

At checkout we do ask you to acknowledge that you are aware of the below material disadvantages when you order.

Disadvantages

Will show marks and scratches easily. Scratches to the back of the Mirror will show through on front.

Must use a non-solvent based glue when adhering findings. Our HASULITH glue is UNSUITABLE for glueing on attachments. Please use e-6000 instead.
Protective Paper film if left on the grey reverse backing for too long can cause lifting at laser cut edges. Please remove this side ASAP to avoid this possibly happening. You can leave paper on Mirror Side to protect surface until ready for final use.
Requires extra handling and specific cutting setting which do incur further charges

Cleaning Tips:

For general purpose cleaning of Acrylic Mirror simply wash with clean cold water with a little mild washing up detergent. Use a clean microfibre cloth to gently dry off. DO NOT USE any solvents such as methylated spirits, turpentine, white spirit or window cleaning products of any kind - as it will cause irreversible surface damage.